The Stability Bar L is needed when the mezzanine cannot be fixed to 2 or more walls.
The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.
Availability date:Add Product Questions
|Kind of product||Stability kits|
|Which height above the flooring board is needed?||From 209 to 233 cm, From 233 to 282 cm, From 282 to 343 cm|
Zone A: Delivery is free (only when total amount exceeds 700€). Countries: UK, Spain (except Canary Islands, Islas Baleraes, Ceuta, Melilla), Portugal, France (except islands and Overseas Territories*), Andorra, Belgium, Holland, Denmark, Sweden, Germany, Austria.
Zone B: Shipments cost about 225 euros. Countries: Switzerland, Slovenia, Slovakia, Czech Republic, Croatia, Montenegro, Macedonia, Yugoslavia, Bosnia-Herzegovina, Bulgaria, Romania, Poland, Filandia, Norway, Estonia, Latvia, Lithuania, Belarus, Ukraine, Russia, Ireland, Spain Islas Baleares, Canarias, Ceuta and Melilla...
Rest of the world. Ask Tecrostar, since this may vary depending on the distance.
For products in stock (white and black), once placed the order the delivery time will be approximately 7 working days.
During our holiday seasons, August, Christmas and Easter, there might be delays in the shipping of the orders.
We inform our customers that TECRO subcontracts the delivery service of its TECROSTAR products. We work together with top international companies, in order to deliver every single order on time and in the best possible way. However, TECRO cannot take charge of economic compensations which arise from the delivery service of its products.
In any case, TECRO will provide support and coverage as far as possible, so that delays do not occur. In the event of a delay, the delivery service provider will take care of the situation.
Mezzanines are shipped in boxes by an external agency. Products are transported in a truck with a raising platform that allow to unnload the box to the ground (to the building entrance in the street)
The characteristics of the Tecrostar packages are:
Do not be scared by the total weight of the product, the pieces are light and handy, so you can easily move them and upload them in the elevator. The heavier pieces are the structural wooden boards (34kg - 2 x 0,9m) that form the floor of the mezzanine. For its handling we recommend 2 people, although the panels fit easily into any elevator.
In most cases it is possible.
In the following video you can see how to install a T15-M completed mezzanine.
Scaffolds or ladders might be required for works at height, specially when the structure is higher than 3m.
Other products like stairs or railings are easier to install and require less tools.
You can do it yourself. Just need a friend to help you out. You can install it easily in a few hours, depending on the product.
* Due to the high weight of the materials, the installation of this structure requires to use a considerable force.
Depending on the number of walls attached to the mezzanine, the following kits of stability will be installed. In case there are less than two adjoining walls, stability kits are recommended to ensure the stability of the plans not braced
You can choose the payment method you prefer: